Fluke
View:
Active Filters :
- Brand: Fluke
closeout
Part #:301776
- CLOSEOUTS Only 1 Left!
- Key features
Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM's
Two ranges 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm
$
289.99
Qty:
closeout
$
395.00
Qty:
closeout
Part #:301870
- CLOSEOUTS Only 1 Left!
- Key features
Current Range0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz) 100mV/A setting50mA to 10A +/- 3% of reading + 50mA 10mV/A setting50mA to 40A +/- 4% of reading + 50mA 40A to 80A +/- 12% of reading + 50mA 80 to 100A +/- 15% of reading
Output Signal10A range 100mV/A 100A range 10mV/A
Bandwidth1Hz to 20kHz
Working Voltage600V AC rms
Maximum Conductor Size11.8 mm (.46 inch) diameter
Safety RatingIEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
$
440.00
Qty:
Qty:
closeout
$
165.00
Qty:
Part #:302002
- Key features
Converts a DMM to a thermometer
For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC)
Measurement range -50 to 1000 °C (probe dependent)
One year warranty
Qty:
Part #:303482
- Availability: Will be backordered (Typically arrives in 14 days)
$
170.00
Qty:
Part #:306373
- Key features
Detect live voltage even when the batteries are dead
3 forms of AC/DC voltage indication light, sound, and vibration for added user protection and convenience
Backlit LCD display and hold function for easier viewing in hard-to-test areas
Qty:
Part #:306973
- Key features
Voltbeat&trade technology and continuous self-test &ndash so you always know it's working
20 V to 90 V AC control circuit detection
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range also available 90 V AC to 1000 V AC
Two-year warranty
Batteries included
On/Off button
Audible/Silent
$
55.07
Qty:
closeout
$
99.00
Qty:
closeout
$
249.00
Qty:
Part #:307015
- Key features
Non-contact voltage detection from 90 to 1000 V AC
Innovative 'Battery Check' ensures battery is in good condition
Integrated clip design, optimized for pocket storage
Always on for faster, safer voltage testing
The Fluke 2AC is the latest addition to the VoltAlert&trade AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly.
Your first-choice tool for go/no-go testing
The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
CAT IV 1000 V overvoltage rated product for best in class user protection
Suitable for a wide range of residential, commercial and industrial needs
Fluke ruggedness and reliability with a two-year warranty
Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.
$
36.99
Qty:
Part #:307341
- Key features
The Fluke i1010 AC/DC current clamp is a battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A.
Provides accurate current reading without breaking the circuit.
Compatible with most Fluke multimeters.
CAT III 600 V safety rating
Qty:
Part #:307502
- Key features
Remotely log, trend and monitor measurements to pinpoint intermittent faults via Fluke Connect®
Inrush measurement to filter out noise and capture motor starting current
Measures AC/DC current to 1000A and AC current to 2500 A with iFlex current probe
Integrated VFD low pass filter for accurate motor drive measurements
$
594.98
Qty:
Part #:307561
- Key features
Oiled genuine top grain cowhide
Rugged construction with heavy duty stitching and reinforced rivets
Large tool belt loop and top flap to secure meter
Holds most Fluke DMMs, thermometers, and process calibrators
One year warranty
Qty:
Part #:309666
- Key features
All functionality of the 87V Industrial Digital Multimeter, plus
Fully insulated 3 mm exposed metal test probes for electricians working in high energy environments
C35 Soft Carrying Case holds meter, test leads and other accessories
TPAK magnetic hanging strap lets you attach the meter to any ferrous surface, such as cabinets and iron pipes.
Qty:
Part #:310102
- Key features
Non-contact AC voltage tester and LED flashlight
Detects from 90 to 600 V AC
Features dual-sensitivity for two levels of detection
Indicates proximity to AC voltage source with blue light
Indicates you&rsquore at the source with red light
Ultra-bright white LED light with 100,000-hour bulb life
Safety rated to CAT IV 600 V
Operating temperature 0°C to 50°C
AAA battery included
$
62.19
Qty:
Part #:310271
- Key features
Zippered carrying case with detachable external pouch
Accomodates Fluke 120 Series ScopeMeter Testtool or a handheld DMM, both main instrument and test accessories
Front pouch can be detached for optimal flexibility
1 year warranty
Qty:
Part #:310333
- Key features
For superior gripping strength use the original TPAK ToolPak&trade
Powerful rare earth magnetic hanger strap with trusted Fluke durability
Hang your meter on nails, hooks and many other objects
Compatible with many Fluke multimeters and tools
$
46.20
Qty:
Part #:300292
- Key features
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Heavy duty EPDM insulation
Length 1.5 m
CAT III 1000 V, 10 A rating. UL listed
One year warranty
Qty:
Part #:300993
- Key features
One pair (red, black) of nickel plated clips
Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. CSA listed
One year warranty
Qty:
Qty:
closeout
$
19.95
Qty:
Displaying: 25 - 48 of 62 Matching Items